Rear wing shims set ZFOIL - WINDFOIL

Shims for adjusting the stab / tail wing.

Each shims is delivered in DUPLICATE.

These shims are meant to be placed between the fuselage and the tail wing.

For the tail wing :

The "-" shims reduce the power of the stab and the max thickness of the shim is at the front.

The "+" shims increase the power of the stab and the max thickness of the shim is at the rear.

For the front wing :

The "+" shims increase the front wing incidence and the max thickness of the shim is at the rear.

3D printed in a flexible but incompressible material, the shims do not break if bent.

Delivered with a 3D printed box.

Max use temp : 60°C