Rear wing shims set FANATIC - WINGFOIL

Shims for adjusting the stab / tail wing - FANATIC (40mm holes distance)

Shims are symetrical and can be used in both side.

Each shims is delivered in DUPLICATE.

These shims are meant to be placed between the fuselage and the stab.

- Put to thickness on the rear screw to increase the tail wing incidence, the foil will be more ardent, more front frooted.

- Put to thickness on the front screw to decrease the tail wing incidence, the foil will be less ardent, more back footed.

3D printed in a flexible but incompressible material, the shims do not break if bent.