{"id":12077,"date":"2026-01-10T13:44:00","date_gmt":"2026-01-10T12:44:00","guid":{"rendered":"https:\/\/kparts-watersports.com\/?post_type=product&#038;p=12077"},"modified":"2026-03-17T11:59:35","modified_gmt":"2026-03-17T10:59:35","slug":"mako-carve-pro","status":"publish","type":"product","link":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/","title":{"rendered":"MAKO CARVE PRO"},"content":{"rendered":"<p data-start=\"316\" data-end=\"486\"><strong>[IN STOCK] \u2013 Ships within 3 to 5 days<br \/>\n<\/strong><\/p>\n<p data-start=\"316\" data-end=\"486\">The<strong data-start=\"319\" data-end=\"337\"> MAKO CARVE PRO<\/strong> is an evolution of the <strong data-start=\"359\" data-end=\"376\">MAKO CARVE V2,<\/strong> designed to go even further in terms of <strong data-start=\"426\" data-end=\"437\">fineness,<\/strong> <strong data-start=\"442\" data-end=\"452\">glide<\/strong>, and <strong data-start=\"459\" data-end=\"483\">overall efficiency.<\/strong><\/p>\n<p data-start=\"488\" data-end=\"722\">A total of <strong>18 prototypes <\/strong>were required to develop these 3 new <strong>MAKO CARVE PRO <\/strong>sizes. By significantly <strong>refining the profiles<\/strong>, the goal was to find the perfect balance between <strong>lift, longitudinal balance, and surf-glide feel.<\/strong> <\/p>\n<p data-start=\"919\" data-end=\"1151\">With less chord at the center and a <strong data-start=\"950\" data-end=\"978\">significantly increased overall fineness,<\/strong> this evolution gives the<strong> MAKO CARVE PRO<\/strong> <strong>better glide <\/strong>and s<strong>uperior glide &amp; pumping efficiency<\/strong> compared to the V2, while <strong>retaining support at low speed<\/strong>, and doing so <strong>with less surface area.<\/strong><\/p>\n<p data-start=\"919\" data-end=\"1151\"><strong>Pitch (longitudinal) stability<\/strong> has also been <strong>improved<\/strong>, allowing <strong>higher speeds<\/strong> to be reached while <strong>maintaining control in powerful waves.<\/strong><\/p>\n<p data-start=\"919\" data-end=\"1151\">Maneuverability remains at the heart of the design for this new <strong>MAKO CARVE PRO<\/strong> range: the two smaller sizes (XS and S) are radical and retain a low aspect ratio for maximum maneuverability.<\/p>\n<p data-start=\"919\" data-end=\"1151\">\ud83c\udd95 New: Sizes M and L are actually <strong>hybrids between the Mako Carve and Glide<\/strong>, designed for riders looking for a <strong>compromise between these two models<\/strong>. They combine <strong>the ease<\/strong> of a Mako Glide <strong>with very good maneuverability<\/strong> for <strong>versatile riding<\/strong>, across all front wing sizes and <strong>all disciplines<\/strong>. They are a relevant choice for surf foil in small to <strong>medium conditions, parawing, and freeride wingfoil.<\/strong>  <\/p>\n<p data-start=\"1924\" data-end=\"1979\">The <strong data-start=\"1927\" data-end=\"1945\">MAKO CARVE PRO<\/strong> is available in <strong>4 sizes <\/strong>\ud83d\udcd0:<\/p>\n<ul>\n<li><strong>XS:<\/strong> 28.5 cm wingspan \u2013 115 cm\u00b2<\/li>\n<li><strong>S<\/strong>: 31.5 cm wingspan \u2013 125 cm\u00b2<\/li>\n<li><strong>M<\/strong> : 35 cm wingspan \u2013 130 cm\u00b2<\/li>\n<li><strong>L<\/strong> : 37 cm wingspan \u2013 145 cm\u00b2<\/li>\n<\/ul>\n<p><strong>The equivalent of the XS<\/strong>, in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 130.<\/p>\n<p><strong>The equivalent of the S,<\/strong> in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 140.<\/p>\n<hr data-start=\"2066\" data-end=\"2069\">\n<p data-start=\"1240\" data-end=\"1654\"><strong>\u2699\ufe0f UHM CARBON construction<\/strong><\/p>\n<p data-start=\"1240\" data-end=\"1654\">The construction also evolves, with a stabilizer molded in <strong data-start=\"1296\" data-end=\"1340\">Ultra High Modulus (UHM) carbon<\/strong>. This layup provides <strong data-start=\"1384\" data-end=\"1407\">excellent stiffness<\/strong>, despite a very thin profile, and a very direct feel,  <b>with no stalls related to stabilizer flex. You can push on it! <\/b><br data-start=\"1512\" data-end=\"1515\">This construction, specific to our <strong data-start=\"1548\" data-end=\"1580\">new 2026 stabilizers<\/strong>, offers one of the <strong data-start=\"1591\" data-end=\"1651\">highest stiffness-to-fineness ratios on the market<\/strong> \ud83d\ude80<\/p>\n<hr data-start=\"2066\" data-end=\"2069\">\n<p data-start=\"2071\" data-end=\"2112\"><strong>New feature \u2013 2026 stabilizer range<\/strong><\/p>\n<p data-start=\"2114\" data-end=\"2432\">The 2026 stabilizers integrate a <strong data-start=\"2151\" data-end=\"2196\">small ramp at the front of the stabilizer<\/strong>, directly molded in, intended for <strong data-start=\"2238\" data-end=\"2254\">bottom mount setups<\/strong> (under the fuselage).<br data-start=\"2274\" data-end=\"2277\">This detail <strong data-start=\"2298\" data-end=\"2321\">improves water flow<\/strong> at the stabilizer entry, <strong data-start=\"2362\" data-end=\"2395\">limits high-speed disturbances<\/strong>, and further <strong data-start=\"2419\" data-end=\"2429\">optimizes glide<\/strong>.<\/p>\n<p data-start=\"2434\" data-end=\"2593\">This evolution is specific to <strong data-start=\"2468\" data-end=\"2492\">bottom mount setups.<\/strong><br data-start=\"2493\" data-end=\"2496\">In <strong data-start=\"2499\" data-end=\"2512\">top mount<\/strong> (Allure, Axis, Cabrinha, etc.), the mounting <strong data-start=\"2562\" data-end=\"2592\">remains similar to the Mako Carve V2.<\/strong><\/p>\n<p data-start=\"2434\" data-end=\"2593\"><strong>IMPORTANT<\/strong>: The Mako Glide &amp; Carve PRO have countersinks for the screws on one side only. It\u2019s up to you to choose the mounting orientation you prefer: BOTTOM MOUNT or TOP MOUNT.<\/p>\n<hr data-start=\"2595\" data-end=\"2598\">\n<p data-start=\"2600\" data-end=\"2630\">Compatibility &amp; mounting \ud83d\udd27<\/p>\n<p data-start=\"2632\" data-end=\"2732\"><strong data-start=\"2651\" data-end=\"2661\">KPARTS<\/strong> stabilizers feature a flat area <strong data-start=\"2678\" data-end=\"2707\">on both sides<\/strong>, allowing mounting:<\/p>\n<ul data-start=\"2733\" data-end=\"2852\">\n<li data-start=\"2733\" data-end=\"2791\">\n<p data-start=\"2735\" data-end=\"2791\"><strong data-start=\"2735\" data-end=\"2760\">above the fuselage<\/strong> (Axis, F-One, Cabrinha, etc.),<\/p>\n<\/li>\n<li data-start=\"2792\" data-end=\"2852\">\n<p data-start=\"2794\" data-end=\"2852\">OR \u2013 under the fuselage (Takuma, AFS, Armstrong, etc.).<\/p>\n<\/li>\n<\/ul>\n<p data-start=\"2854\" data-end=\"2950\">The <strong data-start=\"2857\" data-end=\"2880\">rear slotted hole<\/strong> allows a mounting spacing of <strong data-start=\"2914\" data-end=\"2928\">30 to 35 mm<\/strong>, depending on the brand \ud83d\udccf<\/p>\n<p data-start=\"2952\" data-end=\"2989\">Each stabilizer is supplied with:<\/p>\n<ul data-start=\"2990\" data-end=\"3154\">\n<li data-start=\"2990\" data-end=\"3025\">\n<p data-start=\"2992\" data-end=\"3025\">a <strong data-start=\"2996\" data-end=\"3020\">felt protective cover<\/strong><\/p>\n<\/li>\n<li data-start=\"3026\" data-end=\"3116\">\n<p data-start=\"3028\" data-end=\"3116\">a <strong data-start=\"3031\" data-end=\"3047\">shim set<\/strong> matching your foil (to be selected from the dropdown menu).<\/p>\n<\/li>\n<li data-start=\"3117\" data-end=\"3154\">\n<p data-start=\"3119\" data-end=\"3154\"><strong data-start=\"3119\" data-end=\"3151\">2 M6 screws<\/strong><\/p>\n<\/li>\n<\/ul>\n<p data-start=\"3156\" data-end=\"3281\">The shim set allows all KPARTS stabilizers to be adapted to your foil, while adjusting the angle to suit your needs.<\/p>\n<p data-start=\"3156\" data-end=\"3281\">The <strong data-start=\"3335\" data-end=\"3357\">adapter shims<\/strong> are produced using <strong data-start=\"3376\" data-end=\"3400\">3D printing<\/strong> (PETG).<\/p>\n","protected":false},"excerpt":{"rendered":"<p>[IN STOCK] \u2013 Ships within 3 to 5 days The MAKO CARVE PRO is an evolution of the MAKO CARVE V2, designed to go even further in terms of fineness, glide, and overall efficiency. A total of 18 prototypes were required to develop these 3 new MAKO CARVE PRO sizes. By significantly refining the profiles, the goal was to find the perfect balance between lift, longitudinal balance, and surf-glide feel. With less chord at the center and a significantly increased overall fineness, this evolution gives the MAKO CARVE PRO better glide and superior glide &amp; pumping efficiency compared to the V2, while retaining support at low speed, and doing so with less surface area. Pitch (longitudinal) stability has also been improved, allowing higher speeds to be reached while maintaining control in powerful waves. Maneuverability remains at the heart of the design for this new MAKO CARVE PRO range: the two smaller sizes (XS and S) are radical and retain a low aspect ratio for maximum maneuverability. \ud83c\udd95 New: Sizes M and L are actually hybrids between the Mako Carve and Glide, designed for riders looking for a compromise between these two models. They combine the ease of a Mako Glide with very good maneuverability for versatile riding, across all front wing sizes and all disciplines. They are a relevant choice for surf foil in small to medium conditions, parawing, and freeride wingfoil. The MAKO CARVE PRO is available in 4 sizes \ud83d\udcd0: XS: 28.5 cm wingspan \u2013 115 cm\u00b2 S: 31.5 cm wingspan \u2013 125 cm\u00b2 M : 35 cm wingspan \u2013 130 cm\u00b2 L : 37 cm wingspan \u2013 145 cm\u00b2 The equivalent of the XS, in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 130. The equivalent of the S, in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 140. \u2699\ufe0f UHM CARBON construction The construction also evolves, with a stabilizer molded in Ultra High Modulus (UHM) carbon. This layup provides excellent stiffness, despite a very thin profile, and a very direct feel, with no stalls related to stabilizer flex. You can push on it! This construction, specific to our new 2026 stabilizers, offers one of the highest stiffness-to-fineness ratios on the market \ud83d\ude80 New feature \u2013 2026 stabilizer range The 2026 stabilizers integrate a small ramp at the front of the stabilizer, directly molded in, intended for bottom mount setups (under the fuselage).This detail improves water flow at the stabilizer entry, limits high-speed disturbances, and further optimizes glide. This evolution is specific to bottom mount setups.In top mount (Allure, Axis, Cabrinha, etc.), the mounting remains similar to the Mako Carve V2. IMPORTANT: The Mako Glide &amp; Carve PRO have countersinks for the screws on one side only. It\u2019s up to you to choose the mounting orientation you prefer: BOTTOM MOUNT or TOP MOUNT. Compatibility &amp; mounting \ud83d\udd27 KPARTS stabilizers feature a flat area on both sides, allowing mounting: above the fuselage (Axis, F-One, Cabrinha, etc.), OR \u2013 under the fuselage (Takuma, AFS, Armstrong, etc.). The rear slotted hole allows a mounting spacing of 30 to 35 mm, depending on the brand \ud83d\udccf Each stabilizer is supplied with: a felt protective cover a shim set matching your foil (to be selected from the dropdown menu). 2 M6 screws The shim set allows all KPARTS stabilizers to be adapted to your foil, while adjusting the angle to suit your needs. The adapter shims are produced using 3D printing (PETG).<\/p>\n","protected":false},"featured_media":12136,"comment_status":"open","ping_status":"closed","template":"","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[187,155],"product_tag":[],"class_list":{"0":"post-12077","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-foils-en","7":"product_cat-wingfoil-stabilizers","8":"desktop-align-center","9":"tablet-align-left","10":"mobile-align-left","12":"first","13":"instock","14":"taxable","15":"shipping-taxable","16":"purchasable","17":"product-type-variable"},"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.3 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>MAKO CARVE PRO - KPARTS WATERSPORTS<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"MAKO CARVE PRO - KPARTS WATERSPORTS\" \/>\n<meta property=\"og:description\" content=\"[IN STOCK] \u2013 Ships within 3 to 5 days The MAKO CARVE PRO is an evolution of the MAKO CARVE V2, designed to go even further in terms of fineness, glide, and overall efficiency. A total of 18 prototypes were required to develop these 3 new MAKO CARVE PRO sizes. By significantly refining the profiles, the goal was to find the perfect balance between lift, longitudinal balance, and surf-glide feel. With less chord at the center and a significantly increased overall fineness, this evolution gives the MAKO CARVE PRO better glide and superior glide &amp; pumping efficiency compared to the V2, while retaining support at low speed, and doing so with less surface area. Pitch (longitudinal) stability has also been improved, allowing higher speeds to be reached while maintaining control in powerful waves. Maneuverability remains at the heart of the design for this new MAKO CARVE PRO range: the two smaller sizes (XS and S) are radical and retain a low aspect ratio for maximum maneuverability. \ud83c\udd95 New: Sizes M and L are actually hybrids between the Mako Carve and Glide, designed for riders looking for a compromise between these two models. They combine the ease of a Mako Glide with very good maneuverability for versatile riding, across all front wing sizes and all disciplines. They are a relevant choice for surf foil in small to medium conditions, parawing, and freeride wingfoil. The MAKO CARVE PRO is available in 4 sizes \ud83d\udcd0: XS: 28.5 cm wingspan \u2013 115 cm\u00b2 S: 31.5 cm wingspan \u2013 125 cm\u00b2 M : 35 cm wingspan \u2013 130 cm\u00b2 L : 37 cm wingspan \u2013 145 cm\u00b2 The equivalent of the XS, in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 130. The equivalent of the S, in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 140. \u2699\ufe0f UHM CARBON construction The construction also evolves, with a stabilizer molded in Ultra High Modulus (UHM) carbon. This layup provides excellent stiffness, despite a very thin profile, and a very direct feel, with no stalls related to stabilizer flex. You can push on it! This construction, specific to our new 2026 stabilizers, offers one of the highest stiffness-to-fineness ratios on the market \ud83d\ude80 New feature \u2013 2026 stabilizer range The 2026 stabilizers integrate a small ramp at the front of the stabilizer, directly molded in, intended for bottom mount setups (under the fuselage).This detail improves water flow at the stabilizer entry, limits high-speed disturbances, and further optimizes glide. This evolution is specific to bottom mount setups.In top mount (Allure, Axis, Cabrinha, etc.), the mounting remains similar to the Mako Carve V2. IMPORTANT: The Mako Glide &amp; Carve PRO have countersinks for the screws on one side only. It\u2019s up to you to choose the mounting orientation you prefer: BOTTOM MOUNT or TOP MOUNT. Compatibility &amp; mounting \ud83d\udd27 KPARTS stabilizers feature a flat area on both sides, allowing mounting: above the fuselage (Axis, F-One, Cabrinha, etc.), OR \u2013 under the fuselage (Takuma, AFS, Armstrong, etc.). The rear slotted hole allows a mounting spacing of 30 to 35 mm, depending on the brand \ud83d\udccf Each stabilizer is supplied with: a felt protective cover a shim set matching your foil (to be selected from the dropdown menu). 2 M6 screws The shim set allows all KPARTS stabilizers to be adapted to your foil, while adjusting the angle to suit your needs. The adapter shims are produced using 3D printing (PETG).\" \/>\n<meta property=\"og:url\" content=\"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/\" \/>\n<meta property=\"og:site_name\" content=\"KPARTS WATERSPORTS\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/people\/AP-3D-Custom\/100076804732870\/\" \/>\n<meta property=\"article:modified_time\" content=\"2026-03-17T10:59:35+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/kparts-watersports.com\/wp-content\/uploads\/2026\/01\/MAKO-CARVE-PRO-NEW.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/\",\"url\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/\",\"name\":\"MAKO CARVE PRO - KPARTS WATERSPORTS\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/kparts-watersports.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/MAKO-CARVE-PRO-NEW.webp\",\"datePublished\":\"2026-01-10T12:44:00+00:00\",\"dateModified\":\"2026-03-17T10:59:35+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/#primaryimage\",\"url\":\"https:\\\/\\\/kparts-watersports.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/MAKO-CARVE-PRO-NEW.webp\",\"contentUrl\":\"https:\\\/\\\/kparts-watersports.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/MAKO-CARVE-PRO-NEW.webp\",\"width\":600,\"height\":600},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/produit\\\/mako-carve-pro\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Accueil\",\"item\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/home\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"SHOP\",\"item\":\"https:\\\/\\\/kparts-watersports.com\\\/en\\\/shop-w\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"MAKO CARVE PRO\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/#website\",\"url\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/\",\"name\":\"KPARTS WATERSPORTS\",\"description\":\"Accessoires custom pour sports nautiques\",\"publisher\":{\"@id\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/#organization\",\"name\":\"KPARTS WATERSPORTS\",\"url\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/kparts-watersports.ovh\\\/wp-content\\\/uploads\\\/2024\\\/09\\\/Kparts-Logo-Favicon.jpg\",\"contentUrl\":\"https:\\\/\\\/kparts-watersports.ovh\\\/wp-content\\\/uploads\\\/2024\\\/09\\\/Kparts-Logo-Favicon.jpg\",\"width\":600,\"height\":600,\"caption\":\"KPARTS WATERSPORTS\"},\"image\":{\"@id\":\"https:\\\/\\\/blanchedalmond-oryx-541128.hostingersite.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/people\\\/AP-3D-Custom\\\/100076804732870\\\/\",\"https:\\\/\\\/www.instagram.com\\\/ap3dcustom\\\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"MAKO CARVE PRO - KPARTS WATERSPORTS","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/","og_locale":"en_US","og_type":"article","og_title":"MAKO CARVE PRO - KPARTS WATERSPORTS","og_description":"[IN STOCK] \u2013 Ships within 3 to 5 days The MAKO CARVE PRO is an evolution of the MAKO CARVE V2, designed to go even further in terms of fineness, glide, and overall efficiency. A total of 18 prototypes were required to develop these 3 new MAKO CARVE PRO sizes. By significantly refining the profiles, the goal was to find the perfect balance between lift, longitudinal balance, and surf-glide feel. With less chord at the center and a significantly increased overall fineness, this evolution gives the MAKO CARVE PRO better glide and superior glide &amp; pumping efficiency compared to the V2, while retaining support at low speed, and doing so with less surface area. Pitch (longitudinal) stability has also been improved, allowing higher speeds to be reached while maintaining control in powerful waves. Maneuverability remains at the heart of the design for this new MAKO CARVE PRO range: the two smaller sizes (XS and S) are radical and retain a low aspect ratio for maximum maneuverability. \ud83c\udd95 New: Sizes M and L are actually hybrids between the Mako Carve and Glide, designed for riders looking for a compromise between these two models. They combine the ease of a Mako Glide with very good maneuverability for versatile riding, across all front wing sizes and all disciplines. They are a relevant choice for surf foil in small to medium conditions, parawing, and freeride wingfoil. The MAKO CARVE PRO is available in 4 sizes \ud83d\udcd0: XS: 28.5 cm wingspan \u2013 115 cm\u00b2 S: 31.5 cm wingspan \u2013 125 cm\u00b2 M : 35 cm wingspan \u2013 130 cm\u00b2 L : 37 cm wingspan \u2013 145 cm\u00b2 The equivalent of the XS, in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 130. The equivalent of the S, in terms of lift and maneuverability, is the Mako Carve V2 &#8211; 140. \u2699\ufe0f UHM CARBON construction The construction also evolves, with a stabilizer molded in Ultra High Modulus (UHM) carbon. This layup provides excellent stiffness, despite a very thin profile, and a very direct feel, with no stalls related to stabilizer flex. You can push on it! This construction, specific to our new 2026 stabilizers, offers one of the highest stiffness-to-fineness ratios on the market \ud83d\ude80 New feature \u2013 2026 stabilizer range The 2026 stabilizers integrate a small ramp at the front of the stabilizer, directly molded in, intended for bottom mount setups (under the fuselage).This detail improves water flow at the stabilizer entry, limits high-speed disturbances, and further optimizes glide. This evolution is specific to bottom mount setups.In top mount (Allure, Axis, Cabrinha, etc.), the mounting remains similar to the Mako Carve V2. IMPORTANT: The Mako Glide &amp; Carve PRO have countersinks for the screws on one side only. It\u2019s up to you to choose the mounting orientation you prefer: BOTTOM MOUNT or TOP MOUNT. Compatibility &amp; mounting \ud83d\udd27 KPARTS stabilizers feature a flat area on both sides, allowing mounting: above the fuselage (Axis, F-One, Cabrinha, etc.), OR \u2013 under the fuselage (Takuma, AFS, Armstrong, etc.). The rear slotted hole allows a mounting spacing of 30 to 35 mm, depending on the brand \ud83d\udccf Each stabilizer is supplied with: a felt protective cover a shim set matching your foil (to be selected from the dropdown menu). 2 M6 screws The shim set allows all KPARTS stabilizers to be adapted to your foil, while adjusting the angle to suit your needs. The adapter shims are produced using 3D printing (PETG).","og_url":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/","og_site_name":"KPARTS WATERSPORTS","article_publisher":"https:\/\/www.facebook.com\/people\/AP-3D-Custom\/100076804732870\/","article_modified_time":"2026-03-17T10:59:35+00:00","og_image":[{"width":600,"height":600,"url":"https:\/\/kparts-watersports.com\/wp-content\/uploads\/2026\/01\/MAKO-CARVE-PRO-NEW.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/","url":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/","name":"MAKO CARVE PRO - KPARTS WATERSPORTS","isPartOf":{"@id":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/#primaryimage"},"image":{"@id":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/#primaryimage"},"thumbnailUrl":"https:\/\/kparts-watersports.com\/wp-content\/uploads\/2026\/01\/MAKO-CARVE-PRO-NEW.webp","datePublished":"2026-01-10T12:44:00+00:00","dateModified":"2026-03-17T10:59:35+00:00","breadcrumb":{"@id":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/#primaryimage","url":"https:\/\/kparts-watersports.com\/wp-content\/uploads\/2026\/01\/MAKO-CARVE-PRO-NEW.webp","contentUrl":"https:\/\/kparts-watersports.com\/wp-content\/uploads\/2026\/01\/MAKO-CARVE-PRO-NEW.webp","width":600,"height":600},{"@type":"BreadcrumbList","@id":"https:\/\/kparts-watersports.com\/en\/produit\/mako-carve-pro\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Accueil","item":"https:\/\/kparts-watersports.com\/en\/home\/"},{"@type":"ListItem","position":2,"name":"SHOP","item":"https:\/\/kparts-watersports.com\/en\/shop-w\/"},{"@type":"ListItem","position":3,"name":"MAKO CARVE PRO"}]},{"@type":"WebSite","@id":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/#website","url":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/","name":"KPARTS WATERSPORTS","description":"Accessoires custom pour sports nautiques","publisher":{"@id":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/#organization","name":"KPARTS WATERSPORTS","url":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/#\/schema\/logo\/image\/","url":"https:\/\/kparts-watersports.ovh\/wp-content\/uploads\/2024\/09\/Kparts-Logo-Favicon.jpg","contentUrl":"https:\/\/kparts-watersports.ovh\/wp-content\/uploads\/2024\/09\/Kparts-Logo-Favicon.jpg","width":600,"height":600,"caption":"KPARTS WATERSPORTS"},"image":{"@id":"https:\/\/blanchedalmond-oryx-541128.hostingersite.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/people\/AP-3D-Custom\/100076804732870\/","https:\/\/www.instagram.com\/ap3dcustom\/"]}]}},"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/product\/12077","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/comments?post=12077"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/media\/12136"}],"wp:attachment":[{"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/media?parent=12077"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/product_brand?post=12077"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/product_cat?post=12077"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/kparts-watersports.com\/en\/wp-json\/wp\/v2\/product_tag?post=12077"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}