[In Stock]
[Ships within 48 hours – Except if you order a stabilizer: the delivery time increases to 2 weeks].
Combine the best of both worlds with this all-new combo: your AFS* wings with the ALLURE 2024 & 2023 mast, thanks to our new KPARTS fuselage.
The geometry of our fuselage is based on that of theoriginal AFS fuselage, in the “short” version, with 2 possible stab positions.
The fuselage allows you to mount original stabilizers but also your custom stabilizers (2 M6 screws, 30mm centres) using the shims supplied.
We have selected the ALLURE mast for its ratio of finesse/rigidity unmatched on the market, in our opinion.
Thickness : 13.2mm at bottom and 14.2mm at top with linear evolution. Full high-modulus carbon construction.
The ALLURE 2024 mast is steeper than the 2023, but the geometry is strictly the same.
The baseplate is supplied with the mast, also in full carbon.
The mast and base plate are produced in Italy at the SABFOIL factory, a guarantee of reliability and durability, both in terms of finish quality and assembly.
The fuselage is machined from 6061-T6 aluminum, anodized GREY.
Fuselage adonization is carried out in France by one of our partners, so that we can control the process and the quality of aluminum protection. Our aim is to offer you the best possible durability against corrosion.
The fuselage should nevertheless be rinsed with fresh water after each use to limit corrosion, and tef-gel (not included) should be used for screws and bolts to limit chemical interaction with stainless steel.
The wings and stabilizers shown in the photos are not included in the package and are for illustrative purposes only.
This mast and fuselage have been optimized for maximum glide, DO NOT JUMP OR FREESTYLE WITH IT.
No guarantee will be valid in the event of suspected breakage linked to these practices.
*Only for ENDURO and EVO range wings.
