THANK YOU FOR READING THE WHOLE 🤙
Rake shims for WING FOIL – 3D printed
IMPORTANT:
– The “+” wedges increase your rake: you’ll be more “nose up”, your nose will be higher when sailing.
– The “-” wedges reduce the rake: you’ll be more “nose down” when sailing.
– For symmetrical plates, the shims are reversible, so there is no difference between “-” and “+” shims.
– The rake shim has a certain thickness (7mm for 1.5° shims), so remember to check the size of your original screws (long enough?). The item “4 M8X40 screws” or “4 M6x40 screws” in the store may be useful.
– Position the smooth side of the shim on the hull side – printing marks on the other side may leave marks.
– Temperature limit for use: 60°C / Beware of storage in vehicles in direct sunlight.
