THANK YOU FOR READING THE WHOLE 🤙
Rake shims for WING FOIL – 3D printed
– Pack of 3 shims: 0.5°/1.0°/1.5°.
– Pack of 2 wedges: 0.8°/1.5°.
– 1 wedge of your choice: 1.0°/1.5°.
– 1 wedge with customized angle (max 2.0°) / Please specify by e-mail when ordering
IMPORTANT:
– The “+” wedges increase your rake: you’ll be more “nose up”, your nose will be higher when sailing.
– The “-” wedges reduce the rake: you’ll be more “nose down” when sailing.
– The rake shim has a certain thickness (7mm for 1.5° shims), so remember to check the size of your original screws (long enough?). The item “4 M8X40 screws” or “4 M6x40 screws” in the store may be useful.
– Position the smooth side of the shim on the hull side – printing marks on the other side may leave marks.
– Temperature limit for use: 60°C / Beware of storage in vehicles in direct sunlight.
