THANK YOU FOR READING THE WHOLE 🤙
Rake shims for WING FOIL – 3D printed
Compatible with Lokéfoil Hydro 2024.
IMPORTANT:
– The “+” shims increase your rake: you’ll be more “nose up”, your nose will be higher when sailing.
– The “-” shims reduce the rake: you’ll be more “nose down” when sailing.
– The rake shim has a certain thickness (7mm for 1.5° shims), so remember to check the size of your original screws (long enough?). The item “4 M8X40 screws” or “4 M6x40 screws” in the store may be useful.
– Position the smooth side of the shim on the hull side – printing marks on the other side may leave marks.
– Temperature limit for use: 60°C / Beware of storage in vehicles in direct sunlight.
Reviews
There are no reviews yet