Made to order: 2 weeks lead time.
CARBON EDITION: Lighter, stiffer, with a unique look!
This tail is designed for a SURF FOIL and WINGFOIL practice in a CARVING and PUMPING perspective.
Be sure of one thing : with this stab you will carve like a boss!
The Mako Carve V2 was developed as a continuation of the V1. This means a stabilizer offering maximum maneuverability, while guaranteeing control in carving with controlled lift and a constant board pitch.
We worked on the profile to make it thinner, while maintaining excellent low speed abilities and stiffness thanks to optimization of the outline and dihedral.
The result is a stabilizer with more glide, more efficient pumping, and a very low stall speed.
MAKO CARVE V2 is available in 4 sizes: 130, 140, 150 and 165.
130: 29.5 cm wingspan
140: 31 cm wingspan
150 : 32.5 cm wingspan
165 : 34 cm wingspan
Kparts stabilizers have a flat area on both sides, enabling them to be mounted above the fuselage (AXIS, FONE, CABRINHA etc) and below (TAKUMA, AFS, ARMSTRONG etc). The rear hole is oblong to allow a mounting distance of 30 to 35mm, depending on the brand.
Each stabilizer comes with a cover, a set of shims to match your foil (choose from the drop-down menu) and 2 longer screws.
The wedge set you choose allows you to adapt all KPARTS stabs to your foil by adjusting the angle to your needs.
Machined stabilizer made from compressed carbon fiber.
The covers are made of felt.
The adapters are made from 3D-printed PETG.
Note: The bumps are reminiscent of a well-known design (by Laurent Borgna), which served as inspiration for the design of this stabilizer.
Yohann L. –
Le 130 libère vraiment l’enduro 700 en mania en comparaison du ha38. Superbe finition.
Bryan H. –
Amazing!
EXACTLY what I hoped it would do for my Silk 850. Faster average speed, looser turns, better pump and glide. A must have for the carving connoisseur.
François B. –
Exactement le stab que je cherchais 🤩
Bravo Anthonin, un super stab que tu as sorti là . Il correspond parfaitement à son descriptif. Je trouve un peu trop cher pour mon porte-monnaie mais il répond totalement à mes besoins en terme de carving et de plage basse, un pur bonheur d’appuyer fort dans les courbes sans que ça décroche. On en oublie très vite son tarif, d’autant plus que je l’utilise en surf foil et en wingfoil.
Ma seule remarque, c’est qu’il est un peu moins rapide que mes stabs F-one, un peu gênant au début, mais rapidement on s’aperçoit qu’il a tout ce qu’il faut pour être performant dans les vagues.
C’est sûr, il y aura des images de ce Mako Carve v2 140 carbon à l’Å“uvre dans mes futures vidéos youtube (Cisco rider).
Nicolas T. –
Top
Alquie B. –
Beau produit et bonnes sensations avec !
Thomas L. –
Super