THANK YOU FOR READING THE WHOLE 🤙
Rake shims for WING FOIL – 3D printed
Compatible with Takoon CARBONE mast plateonly.
The turntable is not completely symmetrical, but can be used in both directions without any problem.
IMPORTANT:
– The “+” wedges increase your rake: you’ll be more “nose up”, your nose will be higher when sailing.
– The “-” wedges reduce the rake: you’ll be more “nose down” when sailing.
– For symmetrical plates, the shims are reversible, so there is no difference between “-” and “+” shims.
– The rake shim has a certain thickness (7mm for 1.5° shims), so remember to check the size of your original screws (long enough?). The item “4 M8X40 screws” or “4 M6x40 screws” in the store may be useful.
– Position the smooth side of the shim on the hull side – printing marks on the other side may leave marks.
– Temperature limit for use: 60°C / Beware of storage in vehicles in direct sunlight.
Stéphane V. –
Parfait pour la Takoon glide 5″
Je trouvais ma board glide 5″ trop nose down. Avec cale de 1,5° le problème est résolu, je peux reculer un peu plus mon foil sans avoir la sensation de piquer du nez, le top pour moi!
Frédéric V. –
Du sur-mesure efficace.
Livraison ultra rapide.
Les cales de rake (+ 2 degrés) et de stab (+2,25 mm) sur mesure m’ont permis d’obtenir les réglages parfaits de mon foil Takoon X-Glide V2 1450 avec mat carbone sur mon flotteur de windfoil JP Autralia Freefoil. A noter que les cales de stab positives ne sont pas disponibles chez Takoon.