KPARTS WATERSPORTS

Séparateur Vertical Blanc 3x90
Séparateur Vertical Blanc 3x90
My cart
Masque 100x100
Store/WATERSPORTS ACCESSORIES/MASTS, FUSELAGES & ADAPTERS WINGFOIL
PACK - ALLURE 2024 mast & KPARTS fuselage for AFS®
+8
+7
+6
+5
+4
+3
+2

PACK - ALLURE 2024 mast & KPARTS fuselage for AFS®

1 650,00 €
Price incl. TVA (20%) 275,00 €
Choose your mast
Stabilizer
Rake shims (symetrical)
In stock: 3 available
Save this product for later
Share this product with your friends
Pin it
PACK - ALLURE 2024 mast & KPARTS fuselage for AFS®
Product Details

[IN STOCK]

Shipped in 48h (Except If you order a stabilizer, the delivery is 2 weeks)

Discover our new combo thanks to our new fuselage : your AFS* wings with the ALLURE mast (2024 & 2023).

Our fuselage features the same geometry as the original AFS fuselage, designed in its 'short' version.

The fuselage allows you to install the original stabilizers as well as your "custom" stabilizers (2 M6 screws, 30mm spacing) using the provided shims.

We have selected the ALLURE mast for its unparalleled finesse/stiffness ratio on the market, in our opinion.
Its thickness: 13.2mm at the bottom and 14.2mm at the top with linear evolution. High modulus full carbon construction.

2024 ALLURE mast is stiffer than 2023.

The plate is delivered with the mast, also in full carbon.
The mast and the plate are produced in Italy in the SABFOIL factory, a guarantee of reliability and durability, both in terms of the quality of the finish and the assemblies.

The fuselage is machined from 6061-T6 aluminum. GREY ANODIZED

The adonisation of the fuselage is carried out in France at one of our partners in order to control the process and the quality of the protection of the aluminium. This with a single goal: to offer you the best durability against corrosion.
The fuselage must still be rinsed with no-salted water after each use to limit corrosion. Tef gel (non included) should be used to prevent chimical interaction with stainless steel screws.
The mast, wings and stabilizers shown in the photos are not included in the pack and are there for illustration purposes only.

*Compatible with ENDURO and EVO front wings only.

We have selected the ALLURE mast for its unparalleled finesse/stiffness ratio on the market, in our opinion.
Its thickness: 13.2mm at the bottom and 14.2mm at the top with linear evolution. High modulus full carbon construction.

2024 ALLURE mast is stiffer than 2023.

The plate is delivered with the mast, also in full carbon.
The mast and the plate are produced in Italy in the SABFOIL factory, a guarantee of reliability and durability, both in terms of the quality of the finish and the assemblies.
The fuselage is machined from 6082-T6 aluminum, GREY ANODIZED
The anodisation of the fuselage is carried out in France at one of our partners in order to control the process and the quality of the protection of the aluminium. This with a single goal: to offer you the best durability against corrosion.

The fuselage must still be rinsed with no-salted water after each use to limit corrosion. Tef gel (non included) should be used to prevent chimical interaction with stainless steel screws.

Mast is delivered with a cover made in France.

The wings and stabilizers shown in the photos are not included in the pack and are there for illustration purposes only.

This Mast and fuselage has been optimized to have maximum glide, NOT SUITABLE FOR JUMPING/FREESTYLING

No warranty in case of suspicion of breakage related to these practices.


Show More
Display prices in:EUR
Scroll to Top