THANKS FOR READING IT ALL 🤙
Rake shims for WING FOIL – 3D printed.
Pack of 3 shims: 0.5°/1.0°/1.5°
Pack of 2 shims: 0.8°/1.5°
1 shim of your choice: 1.0°/1.5°
1 custom angle shim (max 2.0°) / To be specified by email when ordering
IMPORTANT :
The “+” shims increase your rake: you’ll ride more nose up, with the nose higher on the water.
The “–” shims reduce your rake: you’ll ride more nose down, with the nose lower on the water.
For symmetrical baseplates, the shims are reversible, so there’s no difference between the “–” and “+” versions.
The rake shim has a certain thickness (7mm for 1.5° shims), so make sure your original screws are long enough; the “4 M8X40 screws” or “4 M6x40 screws” items in the shop may be useful.
Position the smooth side of the shim against the hull – the print lines on the other side may leave marks.
Maximum operating temperature: 60°C / Be careful when storing in vehicles under direct sunlight.
