THANKS FOR READING IT ALL 🤙
Rake shims for WING FOIL – Made with 3D printing
Please choose your mast type, Regular or Performance. Since the plate outline differs, it’s essential to select the model that matches yours.
– Pack of 3 shims : 0.5°/1.0°/1.5°
– Pack of 2 shims : 0.8°/1.5°
– 1 shim of your choice: 1.0°/1.5°
– 1 custom-angled shim (max 2.0°) / Specify by email when ordering
IMPORTANT :
– “+” shims increase your rake: you’ll ride more “nose up,” with the front of the board higher on the water.
“–” shims reduce your rake: you’ll ride more “nose down,” with the front of the board lower on the water.
The rake shim has a certain thickness (7mm for 1.5° shims), so make sure your original screws are long enough—items like “4 M8X40 screws” or “4 M6x40 screws” from the store may be helpful.
Place the smooth side of the shim against the board hull – the print marks on the other side could leave traces.
– Température limite d’utilisation : 60°C / Attention au stockage dans les véhicules en plein soleil.
Eric P. –
Parfait
Philippe M. –
Très bon service
Nicolas M. –
Large choix de cales, site Web très clair et livraison express. Merci !
Stefan B. –
Really like this product!
Super fast delivery, very good quality 🙂
Julien D. –
Nice prowduct ans giis advice for the size