Mât Aluminium KPARTS – Multi-marques

[Ships within 7 days]

We have developed this new concept of multi-compatible aluminum masts with a single aim in mind: to offer you custom equipment at a lower cost without sacrificing performance, and to explore the different foils on the market without breaking the bank with a high-performance mast offering unbeatable value for money.

Compatible with 9 different brands and 10 fuselages (2 fuselages for the GONG® brand), plus the 6 KPARTS fuselages that use the same mast interface as the ALLURE® mast.

You can therefore switch from one brand to another without worrying about the mast, thanks to our different adapters.

And since we don’t do things by halves :

• All screws for adapter-mast-platinum assemblies are TITANE and M8*.
• The plate is screwed AND glued to guarantee maximum rigidity, no play and low maintenance.

This guarantees greater durability and the absence of galvanic corrosion usually present between stainless steel and aluminum screws.

The plate has a rigid rubber protection to prevent any scratches on your board hull.

The mast profile is 115mm chord by 16mm thickness: in our opinion, the best compromise between rigidity and glide! And it’s a non-ventilating profile: you can push hard in wingfoil, the mast won’t stall!

About Weight:

• The 85cm mast weighs 2.065 kg (with base plate + adapter + screws).
• The 80cm weighs 1.965 kg
• The 75cm weighs 1.865kg

Maintenance: like any aluminum equipment exposed to salt water, it must be thoroughly rinsed with fresh water after each use to maximize durability.

All components are made from 6061 aluminum, then anodized black.

Would you like a plate that can still be dismantled? Please contact us.

Screws for the mast / hull assembly are not included, but are available as an option.

*Except for the ALLURE® / KPARTS adapter, M6, for which M8–M6 titanium diameter reducers are supplied and pre-installed.