🌀POD V3 – Simpler, more precise, stronger.

This POD is a half-POD, more ergonomic and practical than a standard POD. It generates less drag and attaches to the mast without any screws.

The V3 features a one-piece design and a new fastening system for easier installation and improved grip, while remaining quick to remove.

⏱️ Quick attachment – Reusable cable tie

The POD now attaches to the mast using a 9 mm wide reusable cable tie, replacing the elastic strap used on the V2.

Its millimetre-step adjustment provides much more precise tightening and better adaptation to different mast chord lengths.

A small rubber ring, supplied with the POD, fits around the mast’s leading edge

👉 The cable tie can be released and reused: there is no need to cut it each time you remove the POD! You can easily install, remove and reinstall your POD.

🆕 V3 – One-piece design

The POD V3 is 3D printed in a single piece using rigid 70D TPU. It replaces the V2 design, which consisted of an outer shell and an internal adapter.

Benefits:

Easy positioning, with just one piece to fit.
More precise tightening, adjusted to your mast’s chord length.
Stronger construction, thanks to its one-piece design.
Easier installation and removal, thanks to the reusable cable tie.

🔧 Included accessories and instructions

9 mm reusable cable ties (×2).
Rubber rings for the leading edge (×2).
Motor mounting screws.
3 mm Allen key.
Assembly instructions included with every parcel, also available as a PDF on request.

🎬 Assembly video: Click here to watch

🧩 Mast compatibility

Compatible with a wide range of masts.

👉 Choose your POD model according to your mast’s thickness. The cable tie’s millimetre-step adjustment then allows you to adjust the fit to its chord length.

👉 When ordering, please write out the full brand and exact model of your mast. Our extensive database of mast profiles allows us to tailor each POD ordered for the most precise fit possible.

⚙️ Motor compatibility

✔️ Compatible with 63 mm motors from brands such as SAITE, FLIPSKY and MAYTECH.
Please check the dimensions and mounting hole spacing.
🆕 Compatible with the FLIPSKY 5085.
✔️ Compatible with the MAYTECH 6579 motor, with an interface adapter included (+€25).
✔️ Compatible with FOIL DRIVE V1 (fixed cable).
⚠️ Requires removal of the original Puck and heat-shrink tubing.
✔️ Compatible with FOIL DRIVE V2 (removable cable), with an interface adapter included (+€25).

🇫🇷 French manufacturing

POD 3D printed in our workshop in France using rigid 70D TPU.