Shims for stabilizer adjustment – Foil FANATIC (holes at 40mm centres)
The wedges are symmetrical and can be used in both directions.
The wedges are delivered in DOUBLE.
These chocks are placed in the docking area, between the fuselage and the horizontal stabilizer.
– Place the thickness of the shim on the rear screw to increase the incidence of the stabilizer and make the foil more fiery.
– Place the thickness of the shim on the front screw to reduce the incidence of the stabilizer and make the foil less fiery.
3D-printed in a relatively flexible but incompressible material. The wedges do not break when bent.
